How do our LED lamps work?

HOW DOES THE LED LAMP L WORK?

Insert the round side of the plug into the back of the lamp. Then plug the other side into the socket. You turn on the lamp by placing your finger on the on/off button for three seconds. The lamp gives a signal and will always be automatically set to 30 seconds. If you want to set a different time, you can do so by briefly placing your finger (+/- 1 second) on the same on/off button. The time will then jump once to the right each time. This way you set a timer, but the light in the lamp will only turn on when it detects something inside. When your hand is in the lamp and the lamp turns on, you can no longer change the time. The timer will then start running. Do you want to adjust the timer? Then take your hand out of the lamp.

When your hand (or foot) is in the lamp, the timer that has been set will start running. The light will automatically turn off after that time or if you remove your hand (or foot) from the lamp earlier. The LED lamp L works with a sensor.

Switching the lamp on and off also works by a sensor. When the lamp is in bright sunlight, adjustment can sometimes be more difficult. We advise you to always do your manicure indoors and out of direct sunlight. For example, if your gel polish is left open in the sun, you will experience that it will harden slightly, resulting in the substance becoming thicker and lumpier over time. The sun emits UV radiation, the same UV radiation that hardens the gel polish.

We recommend that you plug the lamp directly into the socket. If you use your lamp with an extension cord, it will become less powerful during use, which will prevent the gel polish from curing properly.

If you want to turn off the lamp completely, we do not recommend that you immediately pull the plug from the socket. Instead, turn off the lamp by placing your finger on the on/off button for 3 seconds. Only then pull out the plug.


HOW DOES THE LED LAMP M WORK?

Insert the plug into the socket in the same way as the LED lamp L. Then turn on the lamp by switching the on and off button on the back. The LED lamp M will beep when it turns on. The light is turned on by pressing the button on top of the lamp. The timer is automatically set to 60 seconds, and this cannot be changed. The lamp gives a signal after 30 seconds.

We recommend curing a maximum of 4 fingers at a time. Cure your thumb separately to ensure the gel polish can be cured fully.

We recommend that you plug the lamp directly into the socket. If you use your lamp with an extension cord, it will become less powerful during use, which will prevent the gel polish from curing properly.

If you want to turn off the lamp completely, we do not recommend that you immediately pull the plug from the socket. Instead, turn off the lamp by switching the on and off switch again. Only then pull out the plug.


WHAT IS THE DIFFERENCE BETWEEN THE TWO LAMPS?

Which lamp should you choose? Which one suits your needs? Let's list the differences.

Size: This first difference is easy to see with and visible at first side. The LED lamp M is more compact in size. This may make it more travel-friendly. The LED lamp L, in turn, has a removable bottom, which can be an advantage.

Hand placement: In the LED lamp M, you can place a maximum of 4 fingers at a time in the lamp. Always cure your thumb separately. A manicure, because of that matter will take a bit longer than using the LED lamp L, in which you can place your entire hand at once.

Wattage: Our LED lamp M has 7 watts, and our LED lamp L has 12 watts. Both work equally well for curing our gel polish.

Do you also want to paint your toenails with gel polish? Then choose the LED lamp L. Not only is the size and removable bottom more practical, but the design is also better suited than the LED lamp M. Thanks to the round cap, the light can shine around the entire foot. The light from the LED lamp M shines only from above, making curing the toenails more challenging.

Despite the LED lamp M shining only from above, the silver 'mirror' inside helps cure your gel polish effectively. This eliminates the need for a round cap and optimizes space, reducing the chance of accidentally hitting the outer part with your fingers.

With the purchase of either lamp, you will receive a two-year warranty!


HOW CAN YOU CLEAN THE LAMPS?

Make sure the lamp is no longer connected to the socket and remove the plug from the back of the lamp. Our LED lamp L has a removable bottom, which makes cleaning easier. Remove this from the round hood. This does not apply if you own the LED lamp M. Apply some Cleaner to a lint-free Nail Wipe and clean both the outside and the inside. Let the lamp airdry and then it is ready to use again.