02 November 21

Twinkle Nail Art

What do you need?

The basics such as the Prep Booster, polishing block, a LED lamp, a Base Coat and a Top Coat

Prep your nails

Prepare your nails by filing them into the desired shape. Remove the natural shine from your nails with the polishing block. Use the Cleaner to clean and degrease your nails. Apply the Prep Booster and let it air dry for 30 seconds.

STEP 1 - APPLY BASE COAT

Apply your favourite base coat and let it cure for 60 seconds under the LED lamp.

Step 2 - Apply first layer of colour

Apply two layers of 333 Oriental Spice on the entire nail and let every nail cure for 60 seconds under the LED lamp.

Step 3 - Apply dots

Apply a bit of 299 Coco White on the Dotting Tool and place two small dots diagonally on the nail. Don’t let this harden yet.

Step 4 - Draw vertical stripes

Apply a little bit of 299 Coco White on the Detail Brush. Then draw two vertical stripes through the dots.

Step 5 - Draw horizontal stripes

Repeat the previous steps but instead of vertical stripes, you now draw horizontal stripes. Between the lines you just drew, you can even draw smaller lines to give the nail art more detail. Let this cure for 60 seconds under the LED lamp.

Step 6 - Apply Top Coat

Apply the Shine topcoat and let it cure for 60 seconds under the LED lamp. After curing, wipe with Pink Cleaner.

Uncovered8 Marble

Start with your usual nail prep routine and apply your favourite base coat. Then you apply the 419 Marshmallow Nude and cure it for 60 seconds.

Once that's done, apply a layer of Blooming Gel and don't cure it. Grab a Flat Brush and mix the 422 Espresso Bean, 420 Sugared Cinnamon and 421 Mocha Brown.

Then you can create the marble effect by making adding the mix over the nail. Once you're satisfied with the result cure it for 60 seconds. Last but not least, end with your favourite top coat.

View All