Twinkle Nail Art

What do you need?

Prep your nails

Prepare your nails by filing them into the desired shape. Remove the natural shine from your nails with the polishing block. Use the Cleaner to clean and degrease your nails. Apply the Prep Booster and let it air dry for 30 seconds. 

STEP 1 - APPLY BASE COAT

Apply your favourite base coat and let it cure for 60 seconds under the LED lamp. 

Step 2 - Apply first layer of colour

Apply two layers of 333 Oriental Spice on the entire nail and let every nail cure for 60 seconds under the LED lamp.

Step 3 - Apply dots

Apply a bit  of 299 Coco White on the Dotting Tool and place two small dots diagonally on the nail. Don’t let this harden yet.

Step 4 - Draw vertical stripes

Apply a little bit of 299 Coco White on the Detail Brush. Then draw two vertical stripes through the dots.

Step 5 - Draw horizontal stripes

Repeat the previous steps but instead of vertical stripes, you now draw horizontal stripes. Between the lines you just drew, you can even draw smaller lines to give the nail art more detail. Let this cure for 60 seconds under the LED lamp.

Step 6 - Apply Top Coat

Apply the Shine topcoat and let it cure for 60 seconds under the LED lamp. After curing, wipe with Pink Cleaner.