Marble Nail Art
What do you need?
- The basics such as the Prep Booster, polishing block, a LED lamp, a Base Coat and a Top Coat
- Nail Art Palette
- Flat Brush
- Dotting Tool
- Detail Brush
- Blooming Gel
- 194 Ivory Blush
- 317 Star Sky Black
- 309 Graceful Green
- 284 Spring Green
- 319 Decent White
- 130 Luxury Gold
Step 1: Prepare your nails for gel polish application
File your nails into shape and remove the natural shine of the nails with a polishing block. Degrease the nails with the Cleaner and apply the Prep Booster on the entire nail. Let the Prep Booster air dry for 30 seconds.
Step 2: Apply base coat
Apply your favourite base coat and let it cure for 60 seconds under the LED lamp.
Stap 3: Apply first layer of colour
Apply two layers of 194 Ivory Blush on the entire nail and let every nail cure for 60 seconds under the LED lamp.
Stap 4: Create stripes on nails
Apply 317 Star Sky Black. 309 Graceful Green, 284 Spring Green and 319 Decent White side by side in stripes on the Nail Art Palette. Make circular movements through the colours with the tip of the dotting tool so that they will blend nicely.
Step 5: Apply Blooming Gel
Apply the Blooming Gel on the entire nail. ‘’Scoop’’ the mixed colours with the Flat Brush onto the pencil and apply from the top to bottom in the wet Blooming Gel. Let this flow out until the desired result is achieved. Cure for 60 seconds under the LED lamp.
Step 6: Apply glitter
Apply a little bit of 130 Luxury Gold on the Detail Brush and carefully spread the glitter over the design. Let this cure for 60 seconds under the LED lamp.
Stap 7: Apply Top Coat
Apply a topcoat of your choice and let it cure for 60 seconds under the LED lamp. Did you use Shine? Remove it with the Cleaner after 2 minutes of cooling.