15 October 21

Swirly Nail Art

What do you need?

Step 1: Prepare your nails for Gel Polish Applications

File your nails into shape and remove the natural shine of the nails with a polishing block. Apply the base and let it cure for 60 seconds under the LED lamp.

Step 2: Apply first layer of gel polish colour

Apply 2 layers of 329 Vanilla Cream over the entire nail and cure each layer for 60 seconds under the LED lamp.

Step 3: APPLY WAVY LINES

Apply a little amount of 330 Caramel Beige on the tapered side of the French Manicure Brush. Draw a wavy line from top to bottom on the left side of the nail.

Step 4: Fill empty spaced

Apply another bit of 330 Caramel Beige on the brush and fill in the empty spaces. Don’t forget to clean the brush when you’re done with this. Then let this cure for 60 seconds under the LED lamp.

Step 5: Draw wavy line

Now apply a bit of 331 Copper Gold on the brush and draw a wavy line on the right side of the nail. Fill in the empty spaces again. Let this cure for 60 seconds under the LED lamp.

Stap 6: Apply Top Coat

Apply the Shine topcoat and let it cure for 60 seconds under the LED lamp. After curing, let it cool down for 2 minutes and then wipe with Pink Cleaner. (not applicable with Ultra Shine)