Swirly Nail Art
What do you need?
- The basics such as the Prep Booster, polishing block, a LED lamp, a Base Coat and a Top Coat
- French Manicure Brush
- 329 Vanilla Cream
- 330 Caramel Beige
- 331 Copper Gold
Prep your nails
Prepare your nails by filing them into the desired shape. Remove the natural shine from your nails with the polishing block. Use the Cleaner to clean and degrease your nails. Apply the Prep Booster and let it air dry for 30 seconds.
STEP 1 - APPLY BASE COAT
Apply your favourite base coat and let it cure for 60 seconds under the LED lamp.
Step 2 - Apply first layer of gel polish colour
Apply 2 layers of 329 Vanilla Cream over the entire nail and cure each layer for 60 seconds under the LED lamp.
Step 3 - APPLY WAVY LINES
Apply a little amount of 330 Caramel Beige on the tapered side of the French Manicure Brush. Draw a wavy line from top to bottom on the left side of the nail.
Step 4 - Fill empty spaced
Apply another bit of 330 Caramel Beige on the brush and fill in the empty spaces. Don’t forget to clean the brush when you’re done with this. Then let this cure for 60 seconds under the LED lamp.
Step 5 - Draw wavy line
Now apply a bit of 331 Copper Gold on the brush and draw a wavy line on the right side of the nail. Fill in the empty spaces again. Let this cure for 60 seconds under the LED lamp.
Stap 6 - Apply Top Coat
Apply the Shine topcoat and let it cure for 60 seconds under the LED lamp. After curing, let it cool down for 2 minutes and then wipe with Pink Cleaner. (not applicable with Ultra Shine)
