418 Meringue Pink Set

• 1x 418 Meringue Pink Pedicure Gel Nail Stickers
• 1x 418 Meringue Pink gel polish 15ml

Gel polish

Preparation
File the nails and roughen the nail plate with the nail file. Then degrease the nails with a Cleaner Wipe and finish your preparation with the Prep Booster by applying it all over the nail plate. Let this air dry for 30 seconds.

In the next three steps, prevent the gel polish from coming into contact with the skin and cuticles to minimize the risk of a possible acrylate allergy. If any polish touches the skin, remove it immediately with a wood stick, corrector pen, or a wipe with cleaner before curing under the lamp.

Step 1. Apply Base Coat
Apply the Base Coat thinly. Cure the Base for 60 sec under the LED lamp.

Step 2. Apply Colour
Apply 1 or 2 layers of your favourite colour. Cure each layer 60 sec. under the LED lamp.

Step 3. The Finishing Touch
Apply the Top Coat for a nice effect and let it cure as well. Finally, remove the adhesive layer with a cleaning cloth and you are ready to go!

Extra care
Apply Cuticle Oil to your cuticles and massage gently.

Pedicure Gel Nail Stickers

Application

Preparation
File your toenails into the desired shape. Cleanse your toenails with a Cleaner Pocket or a Nail Wipe with Cleaner to remove any oils. Apply the Prep Booster over the entire nail plate and let it air dry for 30 seconds.

Step 1: Choose the right sticker
Hold the sticker sheet over your toenail and choose the sticker that fits best. Ensure the Pink Gellac logo is on the right side. Carefully remove the protective film. If you're unsure, select a sticker slightly narrower than your toenail to prevent premature lifting. Is the sticker too wide for your toenails? Trim the sides to achieve the perfect fit.

Step 2: Apply and cure
Place the sticker on your toenail and press it down firmly. Smooth the edges using the flat side of a woodstick and roll it over the sticker. Leave a 1 mm gap between the sticker and your cuticle to prevent lifting. Trim the sticker to the length of your natural nail, leaving a small edge, and cure under the LED lamp for 120 seconds.

Step 3: Finish
File the cured sticker to the desired length and shape. Smooth the edges by filing in one direction.

Optional: Apply Top Coat
For extra shine and durability, apply a thin layer of Shine Top Coat. Avoid skin contact and remove any excess with a Gel Polish Corrector Pen or woodstick before curing. Cure the Top Coat for 60 seconds under the LED lamp. Remove the sticky layer with a Cleaner Pocket or Nail Wipe, and after 1 minute, apply nourishing Cuticle Oil for added hydration.

Removal

Gently slide a woodstick under the edges of the sticker. Apply Cuticle Oil along the edges of the sticker. Slowly lift the sticker off the toenail, adding more oil under the sticker as you go to help loosen it. Repeat until the sticker is fully removed.

418 Meringue Pink Gel Polish
Polyurethane-57, Benzyl Methacrylate, Trimethylolpropane Trimethacrylate, ISOBORNYL METHACRYLATE, Silica, Ethyl trimethylbenzoyl phenylphosphinate, BENZYL ALCOHOL, PEG-9 dimethacrylate, Synthetic fluorphlogopite, TIN OXIDE, CI 77891, CI 73360, CI 19140, CI 77491

418 Meringue Pink Pedicure Gel Nail Stickers
Acrylates Copolymer, Polyarcrylic Acid, PPG-3 Glyceryl Ether Triacrylate, Isopropyl Thioxanthone, Mica
May contain: CI15850, CI19140, CI42090, CI47005, CI77499, CI77891, CI77000, CI77163