Gel Polish

Safe usage

Prevent the gel polish from coming into contact with the skin and cuticles to minimise the risk of a possible acrylate allergy. If any gel polish touches the skin, remove it immediately with a woodstick, corrector pen, or a wipe with cleaner before curing under the lamp.

Preparation

File the nails with the nail file and buff the nail plate with a polishing block. Then degrease the nails with a nail wipe with some cleaner. Finish your preparation by applying the Prep Booster all over the nail plate and letting it air dry for 30 seconds.

How to apply

Step 1. Apply Base Coat: Apply a thin layer of Base Coat. Cure it for 60 seconds under the LED lamp.

Step 2. Apply Colour: Apply 1 or 2 layers of your favourite colour. Cure each layer for 60 seconds under the LED lamp.

Step 3. Apply Top Coat: Apply a thin layer of Top Coat and cure it for 60 seconds under the LED lamp. Wait 2 minutes, then remove the sticky layer with a nail wipe and some cleaner.

Extra care: Wait 1 minute after removing the sticky layer with cleaner, then apply Cuticle Oil to your cuticles and massage gently.

How to remove

Curious how to easily remove your gel manicure? Follow our step-by-step tutorial on

how to remove your gel polish

.

Gel polish manual

For more detailed guidance on applying and removing gel polish, refer to our 

gel polish manual

.

Gel Nail Stickers

Application

Preparation

File your toenails into the desired shape. Cleanse your toenails with a Cleaner Pocket or a Nail Wipe with Cleaner to remove any oils. Apply the Prep Booster over the entire nail plate and let it air dry for 30 seconds.

Step 1: Choose the right sticker

Hold the sticker sheet over your toenail and choose the sticker that fits best. Ensure the Pink Gellac logo is on the right side. Carefully remove the protective film. If you're unsure, select a sticker slightly narrower than your toenail to prevent premature lifting. Is the sticker too wide for your toenails? Trim the sides to achieve the perfect fit.

Step 2: Apply and cure

Place the sticker on your toenail and press it down firmly. Smooth the edges using the flat side of a woodstick and roll it over the sticker. Leave a 1 mm gap between the sticker and your cuticle to prevent lifting. Trim the sticker to the length of your natural nail, leaving a small edge, and cure under the LED lamp for 120 seconds.

Step 3: Finish

File the cured sticker to the desired length and shape. Smooth the edges by filing in one direction.

Optional: Apply Top Coat

For extra shine and durability, apply a thin layer of Shine Top Coat. Avoid skin contact and remove any excess with a Gel Polish Corrector Pen or woodstick before curing. Cure the Top Coat for 60 seconds under the LED lamp. Remove the sticky layer with a Cleaner Pocket or Nail Wipe, and after 1 minute, apply nourishing Cuticle Oil for added hydration.

Removal

Gently slide a woodstick under the edges of the sticker. Apply Cuticle Oil along the edges of the sticker. Slowly lift the sticker off the toenail, adding more oil under the sticker as you go to help loosen it. Repeat until the sticker is fully removed.